Web Analytics
in stock
Power Tools Accessories

M.a. Ford Solid Carbide Burrs M.a. Ford Company See Price 2018 Ads, Deals and Sales.

"Today, if you do not want to disappoint, Check price before the Price Up.M.a. Ford Solid Carbide Burrs M.a. Ford Company You will not regret if check price."  low price M.a. Ford Solid Carbide Burrs M.a. Ford Company

Content:

M.a. Ford Solid Carbide Burrs M.a. Ford Company.

$26.99 - $27.99
Top Rated Supplier of Firearm Reloading Equipment, Supplies, and Tools - Colt

Product Description

Precision Ground Carbide Cuts Cost & Speeds Production


Big Book Catalog, Issue:71, Page:444

SPECS: 25 flutes; right hand spiral and rotation; No. 3 cut; 1/8' (3.2mm) shank; All cutting surfaces are ¼" (6.3mm) dia. with lengths as follows: #1 = 9/16" (14.3mm) and #2 = ½" (12.7mm).

1911 Auto Hss Lo-Mount Sight Base Cutter Brownells.

$49.99
These cutters are specially designed by us and made to our specifications for cutting the sight base slot required to mount the Wichita ...

Product Description

65\ Shoulder x .495"

These cutters are specially designed by us and made to our specifications for cutting the sight base slot required to mount the Wichita and Novak Lo-Mount 1911 Auto sights. Use ¼" carbide end mill to remove the bulk of the material (see drawing above) then make final dovetail cut. Final cut to lower rear of slide is done with an end mill and is not a part of the sight base cut. Made slightly undersized to compensate for variations in sight bases and milling tolerances on installation. With the popularity of custom 1911 Auto Pistols, this cutter is one that you will use frequently in your custom work. CAUTION: For use in milling machine only. 2" (5cm). .495" diameter cut. ½" (12.7mm) diameter shank. 65° shoulder. DO NOT EXCEED 700 rpm, HIGHER SPEED WILL BREAK TEETH.


1911, Issue:11, Page:061
Big Book Catalog, Issue:71, Page:152
Big Book Catalog, Issue:71, Page:478

Letter Drills - Jobber Length Triumph Twist Drill Co..

$6.99 - $20.99
A heavy-duty drill can make all the difference in the world in your work. The extra engineering and care in manufacture will help ...

Product Description

U.S. Made

A heavy-duty drill can make all the difference in the world in your work. The extra engineering and care in manufacture will help you to drill cleaner, more accurate holes, and many more of them at that. All the Drills we carry, Sets, Individuals, Jobber Length and Short Length, are made from High Speed Steel with a 135° self-centering point. Special point and surface treatments (Maxi-Set not treated) give easier, more wear-resistant drilling of the tough steels encountered in the gun shop.


Big Book Catalog, Issue:71, Page:446
SPECS: High speed steel.

High Speed Steel End Mill Cutter Brownells.

$35.99 - $53.99
Center-cut, four-flute design cuts on the side and bottom to save machine time and money; you can make plunge cuts without pre-drilling. ...

Product Description

High Speed Steel & Carbide, Handle Gunshop Milling Chores

Center-cut, four-flute design cuts on the side and bottom to save machine time and money; you can make plunge cuts without pre-drilling. All are right-hand helix for right-hand turning equipment. For general purpose end milling operations in unhardened steels. ¼" through 7⁄16" sizes contain 8% cobalt for added toughness.


Big Book Catalog, Issue:71, Page:449

SPECS: 5mm through 3⁄8" sizes have 3⁄8" dia. shanks, ½" size has ½" dia. shank. Overall lengths from 2-7⁄16" (6.2cm) to 3¼" (8.25cm). ¼" (6.35mm) dia. x 5⁄8" (15.8mm) long cut. 3⁄8" (9.5mm) dia. x ¾" long cut. ½" (12.7mm) dia. x 1¼" (3.17cm) long cut.

 

.480x65 Dovetail Cutter Evolution Armory.

$162.99
The .480x65 Dovetail Cutter enhances the capabilities of any gunsmith looking to install Low Mount sights onto project handguns and ensures that ...

Product Description

The .480x65 Dovetail Cutter enhances the capabilities of any gunsmith looking to install Low Mount sights onto project handguns and ensures that they have the right high-quality tool for the job.

The .480x65 Dovetail Cutter is designed specifically to cut a slightly undersized slot for rear sights that fit a standard .500" dovetail. The cutter is slightly undersized in order to provide gunsmiths with the ability to do final fitting and ensure that even slightly undersized sights will work.

  • Cutting tool made from solid carbide
  • Six-flute design
  • Made with 1/2-inch shank

The .480x65 Dovetail Cutter measures 2.53 inches in overall length and can be used to remove 0.001 of an inch of material after the initial pass for a precision-machined fit.

High-Speed Steel Cutting Kits For Lathes - 1/4 Turning Kits Brownells.

$114.99
 Tooling kits include hardened steel toolholders and high speed steel inserts for turning, threading, profiling, and cut-off work. Inserts are T-15 High Speed ...

Product Description

Tool Holders & Inserts For Turning

 Tooling kits include hardened steel toolholders and high speed steel inserts for turning, threading, profiling, and cut-off work. Inserts are T-15 High Speed Steel (HSS) hardened to Rc 65-67, then finish ground on all sides. They deliver excellent slow speed performance, precision interrupted cuts, and a smooth finish on stainless steel, Inconel, Monel, exotic metals, and plastics. Square shank toolholders and boring bars are CNC machined from 4140/4142 steel bar stock, hardened to Rc 48-50, and then black oxide coated to resist corrosion. Includes five ¼" square toolholders and six inserts, including one spare.


Big Book Catalog, Issue:71, Page:450

SPECS: Toolholders - 4140/4142 steel, Rc 48-50, black oxide finish. .250" square, 3.5" OAL shanks. Inserts - six T-15 HSS TPMW-1.8-1.5-1, Rc 65-67, finish ground on all surfaces. 11° positive, 218 IC, .093 thick, .100 hole, 130 top opening @ 60° .015 radius.

Front Sight Insert Cutter Brownells.

$29.99
We've had many requests for a small dovetail cutter that would speed up the cutting of dovetails in front sight blades when ...

Product Description

60\ Shoulder x .245"

We've had many requests for a small dovetail cutter that would speed up the cutting of dovetails in front sight blades when installing colored inserts. The one we've had made cuts a ¼" wide dovetail, just right for sight inserts, and the finished product is very precise. Since the cutter is small, (it tapers to a diameter of .110"), you must make an initial cut with a 1/8" end mill. By using the end mill to remove some metal first, you'll avoid overloading the cutter and breaking it. CAUTION: For use in milling machine only. High speed steel. 21⁄32" (5.1cm) long. 1⁄4" (6.3cm) diameter shank. Maximum cut depth is .100" (2.5mm) 60° shoulder. DO NOT EXCEED 700 rpm, HIGHER SPEED WILL BREAK TEETH.


1911, Issue:11, Page:061
Big Book Catalog, Issue:71, Page:152
Big Book Catalog, Issue:71, Page:478

High-Speed Steel Cutting Kits For Lathes - 1/2 Threader Brownells.

$80.99
Tooling kits include hardened steel toolholders and high speed steel inserts for turning, threading, profiling, and cut-off work. Inserts are T-15 High Speed ...

Product Description

Tool Holders & Inserts For Threading

Tooling kits include hardened steel toolholders and high speed steel inserts for turning, threading, profiling, and cut-off work. Inserts are T-15 High Speed Steel (HSS) hardened to Rc 65-67, then finish ground on all sides. They deliver excellent slow speed performance, precision interrupted cuts, and a smooth finish on stainless steel, Inconel, Monel, exotic metals, and plastics. Square shank toolholders and boring bars are CNC machined from 4140/4142 steel bar stock, hardened to Rc 48-50, and then black oxide coated to resist corrosion. Includes a 6" long bar with offset end pocket for cutting ID and OD threads; plus, two high-speed steel inserts, TNMC-32NV and TPMC-32NV.


Big Book Catalog, Issue:71, Page:450

SPECS: Bar - .500" shank, 6.0" OAL, end pocket is offset for ID and OD thread, 1.375" minimum bore diameter, 60°. Inserts - 11° positive, .250 IC, .125 thick, .110 hole, .146 top opening, .015 radius. T-15 HSS, one TNMC-32NV and one TPMC-32NV. Includes two MS-1153 screws and T-7 wrench.

High-Speed Steel Cutting Kits For Lathes - 5/16 Cut-Off Kit Brownells.

$64.99
Tooling kits include hardened steel toolholders and high speed steel inserts for turning, threading, profiling, and cut-off work. Inserts are T-15 High Speed ...

Product Description

Tool Holders & Inserts For Cut-Off

Tooling kits include hardened steel toolholders and high speed steel inserts for turning, threading, profiling, and cut-off work. Inserts are T-15 High Speed Steel (HSS) hardened to Rc 65-67, then finish ground on all sides. They deliver excellent slow speed performance, precision interrupted cuts, and a smooth finish on stainless steel, Inconel, Monel, exotic metals, and plastics. Square shank toolholders and boring bars are CNC machined from 4140/4142 steel bar stock, hardened to Rc 48-50, and then black oxide coated to resist corrosion. Includes one 5⁄16" square shank bar, 3" long, plus one T-15 high speed steel .062" x 3" cut-off blade.


Big Book Catalog, Issue:71, Page:450

SPECS: Bar - 5⁄16" shank, 3" OAL. Insert - T-15 HSS, .062" x 3". Includes 7⁄64" wrench.

M.a. Ford Solid Carbide Burrs M.a. Ford Company See Price 2018 Ads, Deals and Sales.

54687621
/
-50% sale, gaming, desktop PC
/
fast, gaming, strong

Add review