Buy at this store.See Detail Online And Read Customers Reviews Site-A-Line Kit & Spuds Alley Supply/sweeny Sitealine prices throughout the online source See individuals who buy "Site-A-Line Kit & Spuds Alley Supply/sweeny Sitealine" Make sure the shop keep your private information private before you purchase Site-A-Line Kit & Spuds Alley Supply/sweeny Sitealine Make sure you can proceed credit card online to buySite-A-Line Kit & Spuds Alley Supply/sweeny Sitealine and the store protects your information from fraudulents Make sure the customer support is definitely there to help you when you place Site-A-Line Kit & Spuds Alley Supply/sweeny Sitealine order with them
Actually pays for itself in sight-in time and ammunition saved. Exclusive diagonal crosshair reticle and parallax adjusted optics provide the simplest and most accurate method available to set the sighting plane on any firearm parallel to the bore axis. Chrome-plated, precision-ground spuds have hardened bronze springs.
SPECS: 4¾" (10.8cm). Tapers from 1.7" (4.3cm) to 1" (2.5cm) diameter. Boresighter only includes vinyl pouch and one spud (please advise). Kit includes Boresighter, 16 spuds in a fitted sty- rene box. Bore spuds for calibers not listed available on special order basis. *Indicates Bore Spuds included in Site-A-Line Kit. H indicates handgun, R indicates rifle, S/G indicates shotgun, C/F indicates centerfire, A/G indicates airgun.
Our Scope Ring Alignment Tool will enable any shooter to properly align and install both 30mm and one inch scope rings from any manufacturer in any style. Use the Alignment Tool before lapping, to align the scope tube in the rings. This Alignment tool goes beyond the traditional pointed rod style tools in that the alignment rods are adjustable within the two tool bodies after the bodies are mounted in the scope rings - no more loosening the rings several times to adjust the rod point lengths. The rods are held in the tool bodies by precision machined collets which exactly center anodized aluminum with cylinder sizes to fit 1 inch rings and 30mm rings. This tool is easy to use, and makes correct scope mounting much easier.
Licensed per USPATNO 7313885
These three tools from Leupold will enable you to mount almost all bases and rings with ease. The Ring Wrench is the ideal tool for turn in style rings, and the Torx Driver fits most of the Torx screws used on newer rings. The handy and compact Leupold Mounting Tool includes 2 Torx drivers, 5 hex head drivers and a slotted screwdriver. All the drivers fold into the compact tool body.
Easily and quickly align scope and rings with perfect accuracy before mounting and "dinging" the scope. Clamp one rod in each ring; if the points don't touch, they're out of alignment. The cause could be mismatched rings, the wrong bases, bases that need shimming or a "tweaked" action. Well worth the small cost and time required to prevent damaging a scope.
The Arisaka Optic Leveler is an inexpensive, easy-to-use tool for leveling scopes mounted in rings or one-piece mounts. The base plate sits on the Picatinny rail or one-piece mount just below the turret cluster of the scope, and then the matching wedge is inserted from the side. As the 11 degree ramped surfaces of the wedge and base engage, the top of the wedge rises upwards and contacts the turret cluster, automatically leveling it.
Space between rail/mount and turret cluster must be from 0.200" to 0.650". Some one-piece scope mounts like those made by Bobro may not have enough space, so be certain to check with your specific scope and mount. The leveler requires a flat surface directly below the turret cluster to function.
SPECS: Weight: 0.4 oz, Material: 6061 anodized aluminum.
Onsale Site-A-Line Kit & Spuds Alley Supply/sweeny Sitealine