Badger Ordnance’s Specialty Mount Adapter is the foundation stone of their convenient system for clamping auxiliary sights or other accessories directly to your optic. The Specialty Mount Adapter goes on the underside of your scope tube - then you choose the "top half" that lets you mount the accessory you want.
Simply place a Specialty Mount Adapter on the bottom side of the scope, then bolt the matching top ring in place – Brownells sells these, separately. It’s fast and easy.
Although the Badger Ordnance Specialty Mount Adapter is designed to fit 34 mm scopes, you can use Badger ring reducers (also sold separately) to make it compatible with 30mm scopes.
Lets you enjoy accurate shooting without reducing collector value of classic millitary rifles. Gives improved sighting without permanent modifications to the rifle. Weaver-style base includes 1" rings, replaces rear sight; use with long eye relief handgun or Scout scopes.
SPECS: Aluminum, black, matte finish. 4 1/2" (11.4cm) lg. Includes 1" rings, instructions.
This version of the Spuhr ISMS scope mount attaches directly to the scope rails on Accuracy International rifle chassis systems - no need for drilling, tapping, or separate rings-and-base. The Ideal Scope Mount System is a revolutionary scope mount with multiple attachment points for accessories like red dot sights, angle / cosine indicators, and other add-ons needed by precision rifle shooters. The built-in level helps prevent you from canting the rifle and compromising accuracy.
The entire ISMS is machined from a single piece of aluminum billet, ensuring it will not flex under heavy recoil. This sturdiness protects the scope from slipping out of alignment under recoil or, worse, being damaged by violent recoil impulse. Low, flat areas on the top and sides give you an unobstructed view of the scope turrets. Lines milled into the top and right side of rings serve as indicator lines for the scope.
The Spuhr ISMS scope mount for Accuracy International chassis has 7 separate locations where accessories or short Picatinny rail segments can be directly attached, including two at 45° angles.
A superb solution for mounting a tactical scope to your AR-15, the EOTech PRS Quick-Disconnect 2" Cantilever Ring Mounts push the scope forward to ensure plenty of eye relief so you can achieve proper head placement without crowding the scope.
With a snap of the single quick-release lever, to lock down the full-length locking bar, the PRS mount clamps solidly to your MIL-STD 1913 Picatinny flattop receiver or scope base. The integral rings hold the scope tightly in place so it won’t shimmy around and lose your zero, even under heavy recoil or from bumps and bangs in the field.
Precision machined, the EOTech PRS Quick-Disconnect 2" Cantilever Ring Mount provides the stability and strength you need for mounting a scope on your AR-15.
ZRODelta’s DLOC-MICRO mount for the Aimpoint Micro T1 red dot sight grabs onto your rifle’s Picatinny top rail with a vise-like hold that that ain’t gonna shake loose, no matter how hard you try to part them. That’s because the DLOC-MICRO comes with three crossbolts that also serve as recoil lugs and a spring-loaded clamping side bar that locks itself on the rail the instant you snap it on.
Not only does the ZRODelta DLOC-MICRO work for the T1, but will also accept the Aimpoint Micro T-2 / H-1 / H-2, Vortex SPARC II, and the Hi-Lux Micro-Max B-Dot. Take it off your rifle to access your backup "iron" sights or secondary optic, and it will still retain true zero when you reattach it to your rifle.
With, ZRODelta’s DLOC-MICRO QD mount, there’s no need to carry tools to install your Aimpoint Micro. Simply loosen the adjustment nut, position the mount and tighten it in place. Heavy-duty springs help keep the DLOC from rattling loose. For an ultra-secure, non-QD installation, simply tighten the nut to spec using a wrench.
Go from a primary, magnified optic to red dot action— with just a twist of your rifle— using the ZRODelta DLOC- Micro 45 Degree Mount. Heavy duty springs in the side bar clamp down the instant you drop the mount on the rail, making installation hassle-free! Sporting three recoil lugs, with six engagement points, the DLOC system bites down on the rail like a snapping turtle, and it won’t shake loose under heavy recoil or abuse in the field. Retention knob lets you hand tightening the mount to rail without worrying about stability.
The ZRODelta DLOC- Micro 45 Degree Mount is constructed of precision-machined aluminum, with a hardcoat anodized finish to ensure lasting durability. Mount can be attached to either left or right side of your rifle to accommodate your shooting style.
Slim enough to fit under most magnified optics, the ZRODelta DLOC-MRO 45 Degree Mount Offset adaptor lets you quickly switch from your primary optic to the MRO sight— with just a twist of your rifle!
Three recoil lugs and six engagement points means the DLOC system grabs on to your rail with an alligator like bite that won’t rattle loose under heavy recoil or rough use in the field. Heavy duty springs in the side bar clamp down the instant you drop the mount on the rail, then add the final tightening with the convenient adjustment knob. Mount ensures optic retains true zero when you take it off and remount it on your rifle.
The ZRODelta DLOC- MRO 45 Degree Mount provides the perfect way to mount your red dot sight alongside the primary optic for close quarter engagements.
The low profile, ZRODelta DLOC-Venom Optic Mount is a handy way to mount a red dot sight onto your rifle, pistol, or tactical shotgun. Easy to install, mount has heavy duty springs inside the side bar that clamp down hard, even before you tighten it. Makes one handed mounting a breeze, plus it won’t rattle loose under the most heavy duty abuse.
Should the optics need to be removed, the ZRODelta DLOC-Venom Optic Mount’s hand tightening knob allows for quick detachment to access back up sighting system or secondary optic.
The ZRODelta DLOC-Venom Optic Weaver Mount is a handy, low profile mount for adding a red dot sight on your rifle, pistol, or tactical shotgun. Heavy duty springs inside the side bar make installation easy, especially when mounting one handed. Mount clamps down hard on your Weaver rail as soon as its dropped in place, then just hand tighten it for an unshakable grip.
If you need to remove the optic, the ZRODelta DLOC-Venom Optic Weaver Mount’s tightening knob lets you remove the sight mount as fast as you installed it.
34mm Specialty Mount Adaptor Badger Ordnance Reviews : You want to buy 34mm Specialty Mount Adaptor Badger Ordnance. Get Cheap 34mm Specialty Mount Adaptor Badger Ordnance at best online store now!!