Product Description

RCBS offers a hand operated neck turner and two models of case trimmer attached neck turners. The hand neck turner includes a micrometer adjuster which can be zeroed to the mandrel and dialed for cut thickness. RCBS mandrels for the hand neck turner are available in 17 through 50 caliber, and the turner kit includes the unique Quick Change Case Holder which fits all case sizes.

For selection of required Hand Case Neck Turner Pilots.

Product Description

This fine selection of hand tools fromLyman performs the three most importantsteps in achieving a clean, uniform primerpocket and flash hole in preparation forseating a new primer. Each tool featuresan unbreakable, comfortable, cushioned,ergonomic polyurethane handle. Flash Hole Uniformer removes burrs from the inside of the flash hole to ensureunobstructed passage of the spark to the powder for consistent ignition from oneround to the next. Insert into flash hole through the case mouth, and a quick,clockwise turn of the tool does the job. Adjustable stop collar allows use with anysize case, from .22 through .45 caliber.

Product Description

The Sinclair Driver and Caseholder system is designed to hold and turn your case while you are neck turning,cleaning case necks or case mouth deburring. The Caseholders and Driver are machined from stainless steel, and the driver has a one fourth hex shaft for use in power screwdrivers or low-speed drill motors. The driver is universal to the Sinclair system and will work with all the Caseholders. Our universal Caseholder enables you to use this system for any cartridge case which has a Lee Auto Prime sheelholder available for it. The Universal Caseholder works with the same #05-2500 drivers as our original caseholders, and it is available as a kit with the Driver and Universal caseholder or individually for those who already have a driver. Remember to order a Lee Auto Prime shellholder for your Universal Caseholder if you don't already have one.

The Sinclair Driver and Caseholder system and a Sinclair Neck Turning Tool takes the hard work out of neck turning using either the Sinclair Power center or a power screwdriver. Holding the neck tuner in one hand and power screwdriver in the other negates the wobble in drive assembly of the screwdriver. This system is a great, inexpensive way to speed up the neck turning process. Also works great for many other case prep operations.

Product Description

All cases should be case mouth deburred after trimming or neck turning. Tool is double-ended with standard 45 degree flutes that debur/chamfer the inside and outside mouth of the case. Can be used with the Sinclair Deburring Tools Holder (#749-002-628) to attach the tool to a power drill or screwdriver. Will fit case mouths ranging from .17 caliber to .45 caliber, Rifle or Handgun.

Product Description

The idea for this platform originated from a writer/customer of ours. The platform is a mounting board for the L.E. Wilson trimmer series that provides storage space for nine (9) case holders and a tapping block for knocking the cases out of the holder. The polyethylene platform has rubber feet, but most of us prefer it c-clamped to the bench.

Product Description

Wilson Case Holders hold the case square to the cutter face for trimming as well as inside neck reaming, case mouth deburring, and military crimp removal. Standard Pistol Case Holders require that cases be tapped into the case holder firmly to hold the case securely due to the straight wall construction. We recommend Q-Style case holders when available for pistol cartridges.